Rapid and energy-saving temperature changes
How to find your order number:
e.g. CTC 256 E3(2) W9
Basic appliance code + Accessories code in any order plus quantity (x) required
| Model sizes | 256 | |
|---|---|---|
| Full-sight glass door (5-layer insulating glazing), heated | B0 | |
| Stainless Steel Grid |  |
E3(x) |
| Temperature profile write/read unit for programming via PC with USB interface for writing to and reading from the chip card, up to 40 ramps | V3 | |
| Additional chip card, blank, formatted (32 kB MEMoryCard XL for a maximum of 40 ramps) |  |
V4 |
| Chip card, pre-programmed for common test standards | V7 | |
| Oven-linked authorisation card (User-ID-Card) - prevents undesired manipulation by unauthorised third parties |  |
V1 |
| Computer interface RS485 (for networking a maximum of 16 ovens) instead of interface USB | V2 | |
| RS232 interface instead of USB | W6 | |
| Connection cable for computer interface RS232 according to DIN 12 900-1 |  |
V6 |
| Interface Ethernet instead of USB inclusive software "Celsius Ethernet-Edition" | W4 | |
| Parallel/USB converter cable with integrated power supply unit to connect PCL3-compatible HP printers with USB interface to MEMMERT units. |  |
W1 |
| Documentation package consisting of parallel USB converter cable including PLC3-compatible HP colour inkjet printer with USB interface (HP Deskjet 6980 or successor) for direct connection of printer to Memmert unit |  |
W2 |
| USB connection cable for computer interface |  |
W7 |
| External control and logging package consisting of mini-Notebook and Software "Celsius", pre-configurated, and lateral swinging arm | W9 | |
| Flexible Pt100 for positioning in chamber or load with the socket in the front control panel, 4-pin according to NAMUR NE 28 for external temperature recording (load temperature) |  |
H4 |
| Potential-free contact (24V/2A) with socket 3 pin, according to NAMUR NE 28 for external monitoring (indication set point reached) |  |
H5 |
| Potential-free contact (24V/2A) for combined fault message (e.g. supply failure, sensor fault, fuse) |  |
H6 |
| Floating triple contact, for signal generation, controlled by programme segment (using PC), for a total of 3 freely selected functions to be activated (e.g. external acoustic and visual signals, shakers, stirrers, etc) | H7 | |
| Works calibration certificate for one temperature and humidity according to customer specification | Z4 | |
| IQ check list with works test data for oven as support for validation by customer | Q1 | |
| OQ check list with works test data for one freely selectable humidity and temperature value incl. temperature distribution survey for 27 measuring points to DIN 12880: 2007-05 as support for validation by customer | Q2 | |
| Software conforming to FDA "Celsius FDA-Edition" for up to 16 units | Q3 | |
| Integration of additional units (up to max.16 units) into an already existent FDA-software licence | Q4 | |
| Start-up of CTC and TTC chambers and brief training (only D, A, CH) through Memmert service. Service not subject to any discount | K9 |
