We never economise on essential matters. Even in the attractively priced standard model, the INCO CO2 incubator has a unique precision and reliability, because cell, tissue and bacteria cultures, as well as micro-organisms growing in vitro, need protection in a controlled and physiologically ideal environment. You can put together your own customised model from 7 additional modules in the accessories list.
On this page, you can find all the essential technical data on the standard fittings of our CO2 incubator. Our customer relations team will be pleased to help if you want further information. If you should require a customised special solution, please contact our technical specialists at myAtmoSAFE@memmert.com.
- INCO CO2 incubator: Reliable incubation of cultures in medicine, life science, environmental technology, bacteriology, virology, microbiology, biotechnology and zoology.
- uniform atmosphere and temperature distribution owing to enclosed, non-turbulent ventilation system in working chamber
- adaptive, fuzzy-supported, multifunctional, digital microprocessor PID-controller
- integral fault diagnostics on temperature, CO2 and humidity limit control
- 2 Pt100 sensors Class A in 4-wire-circuit, mutually monitoring and taking over the performance at the same temperature value
- digital 7-day-programme-timer with real time clock, precise minute setting
- digital display (LED) of all set parameters, such as temperature, weekdays, time, CO2, humidity and set-up values - language to be chosen in setup
- CO2-supply via sterile filter
- digital electronic CO2 control with automatic zeroing (infrared measuring system) - range of adjustment 0-10% - resolution 0,1%
- intrinsic adjustment of altitude above sea level
- CO2-supply being interrupted upon door opening
- digital display of set and actual values (LED) of temperature (0,1 °C resolution) and of CO2-concentration (0,1%)
- integrated humidity limit control (88-97%) with digital display of relative humidity - resolution of display: 0,5%, setting accuracy: 1%
- programme stored on power failure
- chip card (STERICard) for sterilisation of working chamber with fixed cycle (4 hrs./160 °C) without removal of sensors and mountings
- large-area multi-function heating system with additional door and back heating to avoid condensation
- incl. works calibration certificate for +37 °C
- with audible and visual alarm in case of over-/undertemperature and over-/under-CO2, open door and empty gas cylinder
- independently working, digitally adjustable electronic overtemperature controller TWW protection class 3.1
- additional integral over- and undertemperature monitor "ASF" (Auto-Safety-Function) automatically following the setpoint value at a preset tolerance range; audible alarm is activated in case of over- or undertemperature, heating is switched off in case of overtemperature
- resolution of display and setting accuracy: 0,1 °C
- mechanical temperature limiter TB protection class 1 switching the heating off at approx. 10 °C above max. oven temperature
- w x h x d: 790 x 938 x 750 mm
- fully insulated stainless steel door with double locking and 4-point adjustment
- inner glass door with opening (8 mm dia.) to take gas samples
- rear zinc-plated steel
- w x h x d: 640 x 640 x 600 mm, 246 l
- easy-to-clean interior, made of stainless steel, reinforced by deep drawn ribbing, material no. 1.4301 (ASTM 304), hermetically welded
- 3 perforated stainless steel shelves, full-width; 2 stainless steel water dishes, half-width
- from +20 °C (however, at least 8 °C above ambient temperature) up to + 50 °C
- temperature variation in time: < +/-0,1 °C (to DIN 12 880: 2007-05)
- temperature uniformity in chamber at 37°C: < +/- 0.3 °C (to DIN 12 880: 2007-05)
- 230 V (+/- 10%), 50/60 Hz
- ca. 2.000 W (during heating)
- net weight approx. 110 kg
- gross weight wooden case approx. 160 kg
- dimensions approx.:
wooden case w x h x d: 94 x 112 x 92 cm - the appliances must be transported upright
- 8419 8998
- Federal Republic of Germany
- DE 66812464
 | Comfort module: two gas connections with quick release connectors, automatic switch-over of gas cylinders | T1 | |
| Hygiene module: electropolished interior seamlessly welded by laser | T2 | |
| Communication module: USB interface, "Celsius" standard software for programming and logging, ring log memory, printer interface | T3 | |
| CO2 module: extended CO2 range from 0 to 20% | T4 | |
| Premium module: includes Comfort, Hygiene, Communication and CO2 module | T5 | |
| Humidity-Modul: active microprocessor control for humidifying and dehumidifying (40-97% rh), incl. digital indication and auto-diagnostic system ensures even more rapid reaching of set humidity and very short recovery times while avoiding condensate formation; humidity supply with distilled water (from an external tank) by a self-priming pump; integral bacteria block by generating hotsteam, dehumidifying via sterile filter; (standard humidity limit control and water dishes are omitted). Can only be ordered together with new incubator (no retrofitting possible) | K7 | |
| O2 module: control of oxygen concentration by N2 inlet; adjustment range 1 % up to 20 % O2; setting accuracy 0,1 % | T6 | |
| Entry port in the rear, heated, with silicone stopper, 57 mm inner diameter | F9 | |
| HEPA-filter for chamber according to EN 1822, packed in sterile condition, incl. fixing unit | H9 | |
| 4-part partitioning of interior with 4-part gas baffle (replacement of 3 full-width by 6 half-width shelves) | K4 | |
| Extra perforated stainless steel shelf, half width | E6(x) | |
| Extra perforated stainless steel shelf, full width | E7(x) | |
| Additional stainless steel grid, full width | E3(x) | |
| Extra water dish, half width | E2(x) | |
| Pressure reducing valve to DIN 8546, incl. gas cylinder monitor | H7 | |
| IQ check list with works test data for oven as support for validation by customer | Q1 | |
| OQ check list including one free-selectable CO2-, humidity and temperature value incl. temperature distribution survey for 27 measuring points to DIN 12880: 2007-05 with works test data as support for validation by customer | Q2 | |
| Software conforming to FDA "Celsius FDA-Edition" for up to 16 units - only with Communication or Premium module | Q3 | |
| Oven-linked authorisation card (User-ID-Card) - prevents undesired manipulation by unauthorised third parties | V1 | |
| Computer interface RS485 (for networking a maximum of 16 ovens) instead of interface USB - only with Communication or Premium module | V2 | |
| Start-up of INCO incubators and brief training (Germany only) through Memmert service. Service not subject to any discount | K9 |
