For safe and precise test procedures in the oilbath that also meet the strictest requirements of thermal safety and the safety of the user, the Excellent class is indispensable. A multifunctional, fuzzy-supported PID process controller with integrated self-diagnosis system ensures absolutely reliable and precise temperature control.

• Temperature range: 20 °C to 200 °C
• Temperature variation (time): < ±0.25 °C at 95 °C
• Triple overtemperature protection: If the electronic heating control should fail, heating is switched off at a fixed level of 10 °C above the setpoint. Electronic overtemperature monitor: With a precision of 0.1 °C (up to 99.9 °C) or 1 °C (above 100 °C) the monitoring temperature can be set up to 10 °C above the rated temperature. In case of failure the electronic temperature limiter TWB protection class 2 switches heating permanently off if the temperature is exceeded. In addition a mechanical temperature limiter, TB, switches heating permanently off if the maximum bath temperature set at the factory is exceeded by 30 °C, or if the fluid level is too low.
• 2 high-grade platinum temperature sensors Pt 100 in a 4-wire circuit (for stable long-term transmission of measurement signals) with mutual sensor monitoring and operation transfer at same working temperature
• Possibility of calibration on the controller
• Programmable digital timer (1 min. to 999 hrs min. with adjustment to the minute up to 99 hrs 59 min., accuracy to the hour above this ) for setting the Delay (delayed programme start) as well as Hold (residual operation time). In addition the start of the hold time can be made dependent on the set temperature being reached
• Visual alarm and acoustic signalling of overtemperature and of too low fluid level