e.g. HPP 108 E0(2) H5
Basic appliance code + Accessories code in any order plus quantity (x) required
| Model sizes | 108 | 749 | |
|---|---|---|---|
| Cold white light module (5,500 Kelvin); 10 LED light strips arranged on the side wall of the interior, illumination strength 10,000 LUX, programme-controlled dimming from 0 to 100% in 10 % steps, ramp programming in combination with temperature and humidity | T7 | - | |
| Cold white light module 5,500 Kelvin + warm white 2,700 Kelvin; 10 LED light strips (5 alternating cold white light strips and 5 warm white light strips) arranged on the side wall of the interior, illumination strength 10,000 LUX, programme-controlled dimming from 0 to 100% in 10 % steps, ramp programming in combination with temperature and humidity | T8 | - | |
| Locking door (security lock) |  |
B6 | B6 |
| Perforated stainless steel shelf |  |
E0(x) | E0(x) |
| Stainless steel tray (non-perforated), 15 mm rim, (may affect the temperature distribution) |  |
E2(x) | E2(x) |
| Stainless Steel Grid |  |
E3(x) | E3(x) |
| Moisture-tight entry port for introducing connections at the side; can be closed from inside by silicone stopper, 23 mm clear diameter, left centre/centre | F0 | F0 | |
| Moisture-tight entry port for introducing connections at the side; can be closed from inside by silicone stopper, 23 mm clear diameter, left centre/top | F1 | F1 | |
| Moisture-tight entry port for introducing connections at the side; can be closed from inside by silicone stopper, 23 mm clear diameter, right centre/centre | F2 | F2 | |
| Moisture-tight entry port for introducing connections at the side; can be closed from inside by silicone stopper, 23 mm clear diameter, right centre/top | F3 | F3 | |
| Stacking version for 2 ovens of equal size (bottom oven modification) |  |
G3 | - |
| Temperature profile write/read unit for programming via PC, for writing to and reading from the chip card, up to 40 ramps |  |
V3 | V3 |
| Additional chip card, blank, formatted (32 kB MEMoryCard XL for a maximum of 40 ramps) |  |
V4 | V4 |
| Oven-linked authorisation card (User-ID-Card) - prevents undesired manipulation by unauthorised third parties |  |
V1 | V1 |
| Computer interface RS485 (for networking a maximum of 16 ovens) instead of interface USB | V2 | V2 | |
| RS232 interface instead of USB | W6 | W6 | |
| Interface Ethernet instead of USB inclusive software "Celsius Ethernet-Edition" | W4 | W4 | |
| Parallel/USB converter cable with integrated power supply unit to connect PCL3-compatible HP printers with USB interface to MEMMERT units. |  |
W1 | W1 |
| Documentation package consisting of parallel USB converter cable including PLC3-compatible HP colour inkjet printer with USB interface (HP Deskjet 6980 or successor) for direct connection of printer to Memmert unit |  |
W2 | W2 |
| USB connection cable for computer interface |  |
W7 | W7 |
| Flexible Pt100 for positioning in chamber or load with the socket in the front control panel, 4-pin according to NAMUR NE 28 for external temperature recording (load temperature) |  |
H4 | H4 |
| Potential-free contact (24V/2A) with socket 3 pin, according to NAMUR NE 28 for external monitoring (indication set point reached) |  |
H5 | H5 |
| Potential-free contact (24V/2A) for combined fault message (e.g. supply failure, sensor fault, fuse) |  |
H6 | H6 |
| Floating triple contact, for signal generation, controlled by programme segment (using PC), for a total of 3 freely selected functions to be activated (e.g. activation of audible and visual signals, exhaust motors, fans, stirrers etc.) |  |
H7 | H7 |
| Additional Pt100 temperature sensor, positioned flexibly in chamber or load, for local temperature measurement (up to 3 additional sensors are possible) - actual temperature shown on multifunction display, recording in integral ring store and documentation via "Celsius" software or printer. | H8(x) | H8(x) | |
| Works calibration certificate for one temperature and humidity according to customer specification | Z4 | Z4 | |
| IQ check list with works test data for oven as support for validation by customer | Q1 | Q1 | |
| OQ check list with works test data for one freely selectable humidity and temperature value incl. temperature distribution survey for 27 measuring points to DIN 12880: 2007-05 as support for validation by customer | Q2 | Q2 | |
| Software conforming to FDA "Celsius FDA-Edition" for up to 16 units | Q3 | Q3 | |
| Integration of additional units (up to max.16 units) into an already existent FDA-software licence | Q4 | Q4 | |
| Guarantee extension by 1 year | Q5 | Q5 |
