e.g. ICP 500 E0(2) H4
Basic appliance code + Accessories code in any order plus quantity (x) required
| Model sizes | 400 | 500 | 600 | 700 | 800 | |
|---|---|---|---|---|---|---|
| Locking door (security lock) |  |
B6 | B6 | B6 | B6 | B6 |
| Perforated stainless steel shelf |  |
E0(x) | E0(x) | E0(x) | E0(x) | E0(x) |
| Stainless steel tray (non-perforated), 15 mm rim, (may affect the temperature distribution) |  |
E2(x) | E2(x) | E2(x) | E2(x) | E2(x) |
| Stainless Steel Grid |  |
E3(x) | E3(x) | E3(x) | E3(x) | E3(x) |
| Entry port for introducing connections at the side; can be closed by flap, 23 mm clear diameter, left centre/centre |  |
F0 | F0 | F0 | F0 | F0 |
| Entry port for introducing connections at the side; can be closed by flap, 23 mm clear diameter, left centre/top |  |
F1 | F1 | F1 | F1 | F1 |
| Entry port for introducing connections at the side; can be closed by flap, 23 mm clear diameter, right centre/centre |  |
F2 | F2 | F2 | F2 | F2 |
| Entry port for introducing connections at the side; can be closed by flap, 23 mm clear diameter, right centre/top |  |
F3 | F3 | F3 | F3 | F3 |
| Other port 23 mm diameter, in special positions in the back wall (please state location) |  |
F6(x) | F6(x) | F6(x) | F6(x) | F6(x) |
| Temperature profile write/read unit for programming via PC, for writing to and reading from the chip card, up to 40 ramps |  |
V3 | V3 | V3 | V3 | V3 |
| Additional chip card, blank, formatted (32 kB MEMoryCard XL for a maximum of 40 ramps) |  |
V4 | V4 | V4 | V4 | V4 |
| Oven-linked authorisation card (User-ID-Card) - prevents undesired manipulation by unauthorised third parties |  |
V1 | V1 | V1 | V1 | V1 |
| Computer interface RS485 (for networking a maximum of 16 ovens) instead of interface USB | V2 | V2 | V2 | V2 | V2 | |
| RS232 interface instead of USB | W6 | W6 | W6 | W6 | W6 | |
| Interface Ethernet instead of USB inclusive software "Celsius Ethernet-Edition" | W4 | W4 | W4 | W4 | W4 | |
| Parallel/USB converter cable with integrated power supply unit to connect PCL3-compatible HP printers with USB interface to MEMMERT units. |  |
W1 | W1 | W1 | W1 | W1 |
| Documentation package consisting of parallel USB converter cable including PLC3-compatible HP colour inkjet printer with USB interface (HP Deskjet 6980 or successor) for direct connection of printer to Memmert unit |  |
W2 | W2 | W2 | W2 | W2 |
| USB connection cable for computer interface |  |
W7 | W7 | W7 | W7 | W7 |
| Connection cable for computer interface RS232 according to DIN 12 900-1 |  |
V6 | V6 | V6 | V6 | V6 |
| Flexible Pt100 for positioning in chamber or load with the socket in the front control panel, 4-pin according to NAMUR NE 28 for external temperature recording (load temperature) |  |
H4 | H4 | H4 | H4 | H4 |
| Potential-free contact (24V/2A) with socket 3 pin, according to NAMUR NE 28 for external monitoring (indication set point reached) |  |
H5 | H5 | H5 | H5 | H5 |
| Potential-free contact (24V/2A) for combined fault message (e.g. supply failure, sensor fault, fuse) |  |
H6 | H6 | H6 | H6 | H6 |
| Floating triple contact, for signal generation, controlled by programme segment (using PC), for a total of 3 freely selected functions to be activated (e.g. activation of audible and visual signals, exhaust motors, fans, stirrers etc.) |  |
H7 | H7 | H7 | H7 | H7 |
| Additional Pt100 temperature sensor, positioned flexibly in chamber or load, for local temperature measurement (up to 3 additional sensors are possible) - actual temperature shown on multifunction display, recording in integral ring store and documentation via "Celsius" software or printer. | H8(x) | H8(x) | H8(x) | H8(x) | H8(x) | |
| Interior lighting (programme-segment-dependent switching on/off by process controller, for example day/night simulation), fluorescent lamps at the back (size 500: 6 lamps each 15 W / approx. 1000 Lux; size 600: 6 lamps each 18 W / approx. 2500 Lux; size 700: 6 lamps each 18 W / approx. 1000 Lux; size 800: 6 lamps each 30 W / approx. 2500 Lux). Thermally isolated illumination box with insulating glass window and reflectors. | - | R2 | R2 | R2 | R2 | |
| Works calibration certificate at three temperatures: 0 °C, 37 °C, 60 °C |  |
Z4 | Z4 | Z4 | Z4 | Z4 |
| IQ check list with works test data for oven as support for validation by customer | Q1 | Q1 | Q1 | Q1 | Q1 | |
| OQ check list including one free-selectable temperature distribution survey for 27 measuring points to DIN 12880: 2007-05 with works test data for incubator as support for validation by customer | Q2 | Q2 | Q2 | Q2 | Q2 | |
| Software conforming to FDA "Celsius FDA-Edition" for up to 16 units | Q3 | Q3 | Q3 | Q3 | Q3 | |
| Integration of additional units (up to max.16 units) into an already existent FDA-software licence | Q4 | Q4 | Q4 | Q4 | Q4 |
