e.g. INC 153 E7(2) H5
Basic appliance code + Accessories code in any order plus quantity (x) required
| Model sizes | 108 | 153 | 246 | |
|---|---|---|---|---|
| Comfort module: two gas connections with quick release connectors, automatic switch-over of gas cylinders | T1 | T1 | T1 | |
| Hygiene module: electropolished interior seamlessly welded by laser | T2 | T2 | T2 | |
| Communication module: USB interface, "Celsius" standard software for programming and logging, ring log memory, printer interface | T3 | T3 | T3 | |
| CO2 module: extended CO2 range from 0 to 20% | T4 | T4 | T4 | |
| Premium module: includes Comfort, Hygiene, Communication and CO2 module | T5 | T5 | T5 | |
| Humidity-Modul: active microprocessor control for humidifying and dehumidifying (40-97% rh), incl. digital indication and auto-diagnostic system ensures even more rapid reaching of set humidity and very short recovery times while avoiding condensate formation; humidity supply with distilled water (from an external tank) by a self-priming pump; integral bacteria block by generating hotsteam, dehumidifying via sterile filter; (standard humidity limit control and water dishes are omitted). Can only be ordered together with new incubator (no retrofitting possible) | K7 | K7 | K7 | |
| Entry port in the rear, heated, with silicone stopper, 57 mm inner diameter | F9 | F9 | F9 | |
| Additional Pt100 temperature sensor, positioned flexibly in chamber or load, for local temperature measurement (up to 3 additional sensors are possible) - actual temperature shown on multifunction display, recording in integral ring store and documentation via "Celsius" software or printer. | H8(x) | H8(x) | H8(x) | |
| HEPA-filter for chamber according to EN 1822, packed in sterile condition, incl. fixing unit | H9 | H9 | H9 | |
| 4-part partitioning of interior with 4-part gas baffle (replacement of 3 full-width by 6 half-width shelves) | - | - | K4 | |
| Locking door (security lock) |  |
B6 | B6 | B6 |
| Door-hinges on left side | B8 | B8 | B8 | |
| Extra perforated stainless steel shelf, half width | - | - | E6(x) | |
| Extra perforated stainless steel shelf, full width |  |
E7(x) | E7(x) | E7(x) |
| Additional stainless steel grid, full width |  |
E3(x) | E3(x) | E3(x) |
| Extra water dish, full width |  |
E2(x) | E2(x) | - |
| Extra water dish, half width |  |
- | - | E2(x) |
| Stacking version for 2 ovens of equal size (bottom oven modification) |  |
G3 | G3 | G3 |
| Subframe 622 mm high |  |
G5 | G5 | G5 |
| Subframe (130 mm high for two stacked cabinets) |  |
G7 | G7 | G7 |
| STERICard (additional or as replacement) for automatic chamber sterilisation cycle (not for sterilising the load!) |  |
V9 | V9 | V9 |
| Oven-linked authorisation card (User-ID-Card) - prevents undesired manipulation by unauthorised third parties |  |
V1 | V1 | V1 |
| Computer interface RS485 (for networking a maximum of 16 ovens) instead of interface USB | V2 | V2 | V2 | |
| RS232 interface instead of USB | W6 | W6 | W6 | |
| Interface Ethernet instead of USB inclusive software "Celsius Ethernet-Edition" | W4 | W4 | W4 | |
| Parallel/USB converter cable with integrated power supply unit to connect PCL3-compatible HP printers with USB interface to MEMMERT units. |  |
W1 | W1 | W1 |
| Documentation package consisting of parallel USB converter cable including PLC3-compatible HP colour inkjet printer with USB interface (HP Deskjet 6980 or successor) for direct connection of printer to Memmert unit |  |
W2 | W2 | W2 |
| USB connection cable for computer interface |  |
W7 | W7 | W7 |
| Connection cable for computer interface RS232 according to DIN 12 900-1 |  |
V6 | V6 | V6 |
| Potential-free contact (24V/2A) with socket 3 pin, according to NAMUR NE 28 for external monitoring (setpoint of temperature and CO2 is reached) |  |
H5 | H5 | H5 |
| Potential-free contact (24V/2A) with socket, 3-pin, according to NAMUR NE 28, for combined fault message of temperature and CO2 controller (e.g. supply failure, sensor fault, fuse) |  |
H6 | H6 | H6 |
| Pressure reducing valve to DIN 8546, incl. gas cylinder monitor | H7 | H7 | H7 | |
| Works calibration certificate for 5%, 7% and 10% CO2 (measured at 37 °C) | Z5 | Z5 | Z5 | |
| IQ check list with works test data for oven as support for validation by customer | Q1 | Q1 | Q1 | |
| OQ check list including one free-selectable CO2-, humidity and temperature value incl. temperature distribution survey for 27 measuring points to DIN 12880: 2007-05 with works test data as support for validation by customer | Q2 | Q2 | Q2 | |
| Software conforming to FDA "Celsius FDA-Edition" for up to 16 units - only with Communication or Premium module | Q3 | Q3 | Q3 | |
| Integration of additional units (up to max.16 units) into an already existent FDA-software licence | Q4 | Q4 | Q4 | |
| Start-up of INCO incubators and brief training (Germany only) through Memmert service. Service not subject to any discount | K9 | K9 | K9 | |
| Guarantee extension to 3 years | Q5 | Q5 | Q5 |
