e.g. HCP 153 E7(2) H5
Basic appliance code + Accessories code in any order plus quantity (x) required
| Model sizes | 108 | 153 | 246 | |
|---|---|---|---|---|
| Additional Pt100 temperature sensor, positioned flexibly in chamber or load, for local temperature measurement (up to 3 additional sensors are possible) - actual temperature shown on multifunction display, recording in integral ring store and documentation via "Celsius" software or printer. | H8(x) | H8(x) | H8(x) | |
| Perforated stainless steel shelf | E7(x) | E7(x) | E7(x) | |
| Stainless Steel Grid |  |
E3(x) | E3(x) | E3(x) |
| Moisture-tight entry port for introducing connections at the side; can be closed from inside by silicone stopper, 23 mm clear diameter, left centre/centre | F0 | F0 | F0 | |
| Moisture-tight entry port for introducing connections at the side; can be closed from inside by silicone stopper, 23 mm clear diameter, left centre/top | F1 | F1 | F1 | |
| Moisture-tight entry port for introducing connections at the side; can be closed from inside by silicone stopper, 23 mm clear diameter, right centre/centre | F2 | F2 | F2 | |
| Moisture-tight entry port for introducing connections at the side; can be closed from inside by silicone stopper, 23 mm clear diameter, right centre/top | F3 | F3 | F3 | |
| Stacking version for 2 ovens of equal size (bottom oven modification) |  |
G3 | G3 | G3 |
| Subframe 622 mm high |  |
G5 | G5 | G5 |
| Subframe (130 mm high for two stacked cabinets) |  |
G7 | G7 | G7 |
| Temperature profile write/read unit for programming via PC, for writing to and reading from the chip card, up to 40 ramps |  |
V3 | V3 | V3 |
| Additional chip card, blank, formatted (32 kB MEMoryCard XL for a maximum of 40 ramps) |  |
V4 | V4 | V4 |
| STERICard (additional or as replacement) for automatic chamber sterilisation cycle (not for sterilising the load!) |  |
V9 | V9 | V9 |
| Oven-linked authorisation card (User-ID-Card) - prevents undesired manipulation by unauthorised third parties |  |
V1 | V1 | V1 |
| Computer interface RS485 (for networking a maximum of 16 ovens) instead of interface USB | V2 | V2 | V2 | |
| RS232 interface instead of USB | W6 | W6 | W6 | |
| Interface Ethernet instead of USB inclusive software "Celsius Ethernet-Edition" | W4 | W4 | W4 | |
| Parallel/USB converter cable with integrated power supply unit to connect PCL3-compatible HP printers with USB interface to MEMMERT units. |  |
W1 | W1 | W1 |
| Documentation package consisting of parallel USB converter cable including PLC3-compatible HP colour inkjet printer with USB interface (HP Deskjet 6980 or successor) for direct connection of printer to Memmert unit |  |
W2 | W2 | W2 |
| USB connection cable for computer interface |  |
W7 | W7 | W7 |
| Connection cable for computer interface RS232 according to DIN 12 900-1 |  |
V6 | V6 | V6 |
| Process-dependent electromagnetic door lock | D4 | D4 | D4 | |
| Potential-free contact (24V/2A) with socket 3 pin, according to NAMUR NE 28 for external monitoring (setpoint of temperature and rh is reached) |  |
H5 | H5 | H5 |
| Potential-free contact (24V/2A) for combined fault message of temperature and rh controller (e.g. supply failure, sensor fault, fuse) |  |
H6 | H6 | H6 |
| Works calibration certificate for 80% rh (measured at 50 °C) | Z5 | Z5 | Z5 | |
| IQ check list with works test data for oven as support for validation by customer | Q1 | Q1 | Q1 | |
| OQ check list with works test data for one freely selectable humidity and temperature value incl. temperature distribution survey for 27 measuring points to DIN 12880: 2007-05 as support for validation by customer | Q2 | Q2 | Q2 | |
| Software conforming to FDA "Celsius FDA-Edition" for up to 16 units | Q3 | Q3 | Q3 | |
| Integration of additional units (up to max.16 units) into an already existent FDA-software licence | Q4 | Q4 | Q4 | |
| Start-up of HCP and brief training (Germany only) through Memmert service. Service not subject to any discount | K9 | K9 | K9 |
