Options / Accessories / Services

for Cooled vacuum oven

Cooled vacuum oven

For gentle drying of bacteria and starter cultures or simulation of intercontinental flights.

Information on Cooled vacuum oven

Options

	Model sizes	29	49
	Works calibration certificate for 3 temperatures: +5°C, +30°C, +90°C at 20 mbar pressure	D00133	D00133
	Potential-free contact (24 V/2 A) with socket, according to NAMUR NE 28 for combination error message (e.g. supply failure, sensor fault, fuse)	H6	H6
	MobileALERT, notification by SMS in case of any error or alarm of the device (Requires option H6)	C3	C3

Accessories

	Model sizes	29	49
	Vacuum pump with chemically resistant 4x diaphragm, pump capacity at atm. pressures: approx. 50 Nl./min = 3,0 m³/h and autom. purge control. Order No. B39410 and B04026 necessary. 230 V, 50 Hz. Max. guarantee period 2 years	E07509	E07509
	Subframe, tubular steel, black enamelled (for stacking unit consisting of vacuum oven and pump module, total height: 1650 mm, see "further data" and sketch of oven dimensions)	E02030	E02031
	Noise-insulated vacuum pump module without pump (exterior dimensions and -material No. s. vacuum oven) with antivibration metal plate at the bottom to accommodate the vacuum pump, incl. full-sight glass door. Socket, signal cable and connecting hose to the vacuum oven	PM29	PM49
	Noise-insulated vacuum pump module, as above, however with built-in pump, 230 V, 50/60 Hz	PMP 29	PMP 49
	Signal cable (3 m) for control of roation speed and optimising pump performance by demand-controlled activation of purge of Memmert pump (not required with pump module)	B39410	B39410
	Vacuum connecting hose (3 m) from oven to Memmert pump incl. optimised connection accessories (partially stainless steel), (not required with pump module)	B04026	B04026
	USB-Ethernet adapter	E06192	E06192
	Ethernet connection cable 5 m for computer interface	E06189	E06189
	USB User-ID stick (with User-ID licence): Oven-linked authorisation licence (User-ID-programme) on Memory-stick, prevents undesired manipulation by unauthorised third parties. When reordering please specify serial number	B33170	B33170
	Software conforming to FDA AtmoCONTROL. Meets the requirements for the use of electronically stored data sets and electronic signatures as laid down in Regulation 21 CFR Part 11 of the US Food and Drug Administration (FDA). Base licence for the control of one unit (only for units with TwinDISPLAY). Respective IQ/OQ documents available in German and English language (without surcharge)	FDAQ1	FDAQ1
	Integration of one additional unit (up to max. 31 units) into an already existent FDA-software licence (only for units with TwinDISPLAY)	FDAQ2	FDAQ2

Services

	Model sizes	29	49
	Guarantee extension by 1 year	GA2Q5	GA2Q5
	Calibration at Memmert factory for a freely selectable temperature value	D00109	D00109
	IQ/OQ document with device-specific works test data, including temperature distribution survey with 5 temperature measuring points and 1 pressure measuring point each thermoshelf at Memmert factory for a freely selectable temperature and pressure value according to DIN12880:2007-05 (PQ check list as support for validation by customer), valid for one thermoshel, price for every further thermoshelf on request	D00117	D00117
	IQ document with device-specific works test data, OQ/PQ check list as support for validation by customer	D00124	D00124