Waterbath WTB24

Ideal for the temperature control of ointments, emulsions, samples, plates and nutrient solutions in the laboratory, as well as warm storage and calibration in the industrial segment

WTB24
New

Waterbath WTB24

Standard delivery Waterbath

On this page, you can find all the essential technical data on the Memmert water bath. Our customer relations team will be pleased to help if you want further information. If you should require a customised special solution, please contact our technical specialists at sales@memmert.com.

Temperature

Temperature sensor digital temperature sensor, mounted on the outside of the bath
Temperature Setting Celsius / Fahrenheit
Working temperature range at least 5 above ambient to +100 (with cover, depending on ambient pressure)
Setting temperature range +10 to +100 °C
Setting accuracy temperature 0.1 °C

Control technology

Calibration 2-point calibration
Controller intuitive 3.5" colour graphic display with touch screen
Controller digital display of set and actual temperature and of (remaining) programme time

Safety

Temperature control two-stage safety system to prevent overtemperature (pressure sensor for level monitoring, thermal fuse for heating shutdown in case of error)
Temperature control individually adjustable overtemperature alarm, visual and acoustic
Temperature control Independent temperature limiter to switch off the heating in case of failure
Autodiagnostic system microprocessor PID-temperature controller with integrated autodiagnostic system with fault indicator

Heating concept

Heating corrosion-proof large-area heating on the outside of the interior

Standard equipment

Cover Stainless steel gable cover
Drain system innovative drain system - easy to empty
Timer digital timer from 1 min. up to 99 hours 59 min., visual and acoustic

Stainless steel interior

Interior Deep-drawn stainless steel tray (stainless steel W.St. 1-4301), without corners and edges for easy cleaning incl. central drain (no disturbing installations)
Dimensions l(A) x w(B) x h(C): 472 x 267 x 200 mm
Volume 23 l
Liquid level min. 20 mm
Liquid level max. 164 mm

Textured stainless steel casing

Dimensions l(D) x w(E) x h(F2): 749 x 349 x 425 mm

Electrical data

Voltage Electrical load 230 V, 50/60 Hz
approx. 1420 W
Voltage Electrical load 115 V, 50/60 Hz
approx. 1420 W

Ambient conditions

Installation The vent openings in the left and back side must remain unobstructed. The distance to the wall must be at least 100 mm on the sides and at least 150 mm to the rear. The minimum spacing from the top of the bath to the next ceiling is 750 mm.
Ambient temperature +5 °C to +40 °C
Humidity rh max. 80 %, non-condensing
Overvoltage category II
Pollution degree 2

Packing/shipping data

Dimensions approx incl. carton l x w x h: 849 x 449 x 525 mm
Transport information The appliances must be transported upright
Customs tariff number 8419 8998
Country of origin Federal Republic of Germany
WEEE-Reg.-No. DE 66812464
Net weight approx. 20 kg
Gross weight carton approx. 23 kg

Standard units are safety-approved and bear the test marks

CE
EAC Eurasian Conformity

More product series of Waterbaths

Waterbath

Waterbath

The combination of corrosion-resistant stainless steel, precise electronics and multiple temperature protection guarantees the highest level of safety in the laboratory.

More product categories

Heating / drying ovens

Incubators

Climate chambers

Archive

m360