CO2 Incubator ICO180

Range of functions

Calibrate	Three freely selectable values: temperature, humidity, and CO2
Interfaces	USB-C; Ethernet LAN
Timer	Timer - Process time starts immediately when the programme starts; Timer SetpointWAIT - Process time only starts after all setpoint values have been reached; Timer on Event - Process time starts at a defined point in time
Language settings	English (default), German, French, Spanish, Portuguese, Chinese, Arabic, Hindi, Polish, Czech, Hungarian, Russian, Italian, Serbian
Appliance functions	Date and time (time zones, summer/winter time); Display brightness; DistanceView (1–4 freely selectable parameters, activation time adjustable); Network settings (IP, subnet, DHCP); Language and volume settings (buzzer/key tone); Power failure behaviour; Timer functions
Adjustable parameters	Temperature; CO2; Relative humidity (requires option K7); O2 (requires option T6)
Control unit	6.86" IPS touch display (480 × 1280 pixels) with multi-touch function for graphical display of actual/setpoint values and parameter curves.

O2 (only with T6 option)

Control system	Anaerobic O2 control for targeted oxygen reduction via nitrogen inlet. Zirconium oxide sensor with integrated monitoring and error display. Filtered N₂ supply for safe process conditions.
Adjustment precision	0,1 %
O2 - Setting range	1 to 20 %

Seguridad

Power failure	Manual mode: Power failure less than 24 hours: Active process is terminated, parameters remain stored. Power failure longer than 24 hours: Operation continues with previously set parameters. Program mode (power failure >1 hour): Failure less than 1 hour: Programme continues with remaining runtime. Failure longer than 1 hour: Programme is stopped; query for continuation required
Temperature monitoring	Dual Pt1000 sensor, DIN Class A, for mutual monitoring and automatic takeover in the event of a fault
Alarma	óptica y acústica

Interior de acero inoxidable

Dimensions	w(A) x h(B) x d(C): 600 x 590 x 500 mm
Volumen	177 l
N° máx. de inserciones	6
Máx. carga de la cámara del equipo:	90 kg
Carga máx. por inserción	15 kg

Datos eléctricos

Voltaje consumo eléctrico	230 V, 50/60 Hz aprox. 1550 W
Voltaje consumo eléctrico	115 V, 50/60 Hz aprox. 1550 W

Condiciones ambientales

Instalación	La separación entre la pared y la parte posterior del equipo deberá ser como mínimo de 15 cm. La distancia hasta el techo debe ser como mínimo de 20 cm y la distancia de los laterales a la pared o al equipo contiguo de al menos 5 cm.
Temperatura ambiente	10 °C a 35 °C
Altura de instalación	Máx. 2000 m sobre el nivel del mar
Categoría de sobretensión	II
Grado de contaminación	2

Datos de embalaje/envío

Información de transporte	¡Los equipos deben transportarse en posición vertical!
Número estadístico de mercancía	8419 8998
País de origen	República Federal de Alemania
N.° Reg. WEEE	DE 66812464
Medidas aprox. incl. cartón	An x Al x F 925 x 1072 x 854 mm
Peso neto	aprox. 98 kg
Peso bruto cartón	aprox. 116 kg

Temperature

Temperature control system	Large-area multi-zone multifunctional all-round heating with additional door, seal and rear wall heating
Setting temperature range	+20 to +50 °C
Rango de temperatura de trabajo	5 sobre la temperatura ambiente a +50 programa de esterilización incluido, 60 minutos a 180 °C – sin la eliminación de los sensores
Resolución del indicador valores nominales de la temperatura y valores reales	0,1 °C
Uniformidad espacial de temperatura	a + 37 °C +/- 0.3 K
Estabilidad temporal de temperatura	a +37 °C +/- 0.1 K

Humidity

Humidification system	Passive humidification by means of integrated water tank with condensate return via magnetically guided sealing lip. Humidity limitation by Peltier element. Active closed-loop humidity control (option K7) with capacitive sensor for precise measurement and complete documentation. Humidification via self-priming micro-dosing pump with hot steam generation, dehumidification via powerful diaphragm pump.
Accuracy	0,1% rh
Setting range	40 to 98 and rh-Off

CO2

Control system	Precise CO2 control with dual-beam NDIR technology, integrated monitoring and pressure-compensated measurement. Filtered CO2 supply for high process reliability.
Temporal fluctuation	± 0,2 %
Setting range	0 to 20 %

Standard equipment

Standard option	Door-open detection | V5
Factory calibration certificate III (Option T6)	+37 °C, 5 %CO2, 90 %RH, 10 %O2
Factory calibration certificate II (Option K7)	+37 °C, 5 %CO2, 90 %RH
Factory calibration certificate I (Standard)	+37 °C, 5 %CO2
Additional accessories	CO2 connection set, hose with connection coupling and hose clamp; Water dish (Basic equipment); Water tank including connection hose (requires Option K7); Preset sterilisation programme: 60 minutes at +180 °C (without removing the sensors)
Puerta	Puerta de acero inoxidable completamente aislada con dos puntos de cierre (cerradura de la puerta con compresión)
Puerta	puerta de cristal interior con orificio (8 mm de Ø) para el muestreo de gas
Inserciones	2 bandeja(s) perforada(s) de acero inoxidable

Textured stainless steel casing

Medidas	w(D) x h(E) x d(F): 748 x 793 x 689 mm
Installation	4 adjustable appliance feet