CO2 Incubator ICO180

Range of functions

Calibrate	Three freely selectable values: temperature, humidity, and CO2
Interfaces	USB-C; Ethernet LAN
Timer	Timer - Process time starts immediately when the programme starts; Timer SetpointWAIT - Process time only starts after all setpoint values have been reached; Timer on Event - Process time starts at a defined point in time
Language settings	English (default), German, French, Spanish, Portuguese, Chinese, Arabic, Hindi, Polish, Czech, Hungarian, Russian, Italian, Serbian
Appliance functions	Date and time (time zones, summer/winter time); Display brightness; DistanceView (1–4 freely selectable parameters, activation time adjustable); Network settings (IP, subnet, DHCP); Language and volume settings (buzzer/key tone); Power failure behaviour; Timer functions
Adjustable parameters	Temperature; CO2; Relative humidity (requires option K7); O2 (requires option T6)
Control unit	6.86" IPS touch display (480 × 1280 pixels) with multi-touch function for graphical display of actual/setpoint values and parameter curves.

O2 (only with T6 option)

Control system	Anaerobic O2 control for targeted oxygen reduction via nitrogen inlet. Zirconium oxide sensor with integrated monitoring and error display. Filtered N₂ supply for safe process conditions.
Adjustment precision	0,1 %
O2 - Setting range	1 to 20 %

Temperature

Temperature control system	Large-area multi-zone multifunctional all-round heating with additional door, seal and rear wall heating
Setting temperature range	+20 to +50 °C
Gamme des températures utiles	5 °C au-dessus de la température ambiante à +50 °C Programme de stérilisation incorporé: 60 minutes à 180 °C (les sondes peuvent rester en place)
Résolution d'affichage des valeurs de la température de consigne et de la température réelle	0,1 °C
Ecart d ́homogéniété	à +37 °C +/- 0.3 K
Ecart de justesse de température	à 37 °C +/- 0.1 K

Humidity

Humidification system	Passive humidification by means of integrated water tank with condensate return via magnetically guided sealing lip. Humidity limitation by Peltier element. Active closed-loop humidity control (option K7) with capacitive sensor for precise measurement and complete documentation. Humidification via self-priming micro-dosing pump with hot steam generation, dehumidification via powerful diaphragm pump.
Accuracy	0,1% rh
Setting range	40 to 98 and rh-Off

CO2

Control system	Precise CO2 control with dual-beam NDIR technology, integrated monitoring and pressure-compensated measurement. Filtered CO2 supply for high process reliability.
Temporal fluctuation	± 0,2 %
Setting range	0 to 20 %

Sécurité

Power failure	Manual mode: Power failure less than 24 hours: Active process is terminated, parameters remain stored. Power failure longer than 24 hours: Operation continues with previously set parameters. Program mode (power failure >1 hour): Failure less than 1 hour: Programme continues with remaining runtime. Failure longer than 1 hour: Programme is stopped; query for continuation required
Temperature monitoring	Dual Pt1000 sensor, DIN Class A, for mutual monitoring and automatic takeover in the event of a fault
Alarme	Visuelle et sonore

Standard equipment

Standard option	Door-open detection | V5
Factory calibration certificate III (Option T6)	+37 °C, 5 %CO2, 90 %RH, 10 %O2
Factory calibration certificate II (Option K7)	+37 °C, 5 %CO2, 90 %RH
Factory calibration certificate I (Standard)	+37 °C, 5 %CO2
Additional accessories	CO2 connection set, hose with connection coupling and hose clamp; Water dish (Basic equipment); Water tank including connection hose (requires Option K7); Preset sterilisation programme: 60 minutes at +180 °C (without removing the sensors)
Porte	Porte en acier inoxydable entièrement isolée avec verrouillage 2 points (fermeture de la porte par compression)
Porte	Porte intérieure en verre avec ouverture (Ø 8 mm) pour prélèvement des échantillons gazeux
Clayettes	2 plateau(x) perforé(s) inox

Textured stainless steel casing

Mésures	w(D) x h(E) x d(F): 748 x 793 x 689 mm
Installation	4 adjustable appliance feet

Caisson intérieur en acier inoxydable

Medidas	w(A) x h(B) x d(C): 600 x 590 x 500 mm
Volume	177 l
Nombre max. clayettes	6
Charge maximale de l'appareil:	90 kg
Charge max. par clayette	15 kg

Données électriques

Tension/Charge électrique	230 V, 50/60 Hz environ 1550 W
Tension/Charge électrique	115 V, 50/60 Hz environ 1550 W

Conditions d'environnement

Installation	Il convient de prévoir un écart de 15 cm minimum entre le mur et le panneau arrière de l'appareil. L'écart ne doit pas être inférieur à 20 cm avec le plafond et à 5 cm sur les côtés par rapport au mur ou à un autre appareil
Température ambiante	10 °C à 35 °C
Altitude d'installation	max. 2000 m au-dessus du niveau moyen de la mer
Classe de surtension	II
Niveau de pollution	2

Données sur l'emballage/l'expédition

Information du transport	Les appareils doivent être transportés en position verticale!
Tarif douanier commun	8419 8998
Pays d'origine	Allemagne
Numéro d'enregistrement DEEE	DE 66812464
Dimensions env., carton inclus	Dimensions avec l'emballage (L x H x P): 925 x 1072 x 854 mm
Poids net	approximatif: 98 kg
Poids brut sous carton	approximatif: 116 kg