On this page, you can find all the essential technical data on the m360 plasticine oven UFPlplus. Our customer relations team will be pleased to help if you want further information. Please contact our technical specialists at m360@memmert.com.
Temperature
| Setting temperature range | +20 to +80 °C |
|---|---|
| Setting accuracy temperature | up to 99.9 °C: 0.1 / from 100 °C: 0.5 |
| Working temperature range | min. 10°C above ambient up to +80°C |
| Temperature sensor | 2 Pt100 sensors DIN Class A in 4-wire-circuit for mutual monitoring, taking over functions in case of an error |
Control technology
| ControlCOCKPIT | TwinDISPLAY. Adaptive multifunctional digital PID-microprocessor controller with 2 high-definition TFT-colour displays. |
|---|---|
| Language setting | German, English, Spanish, French, Polish, Czech, Hungarian, Italian, Chinese |
| Timer | Digital backwards counter with target time setting, adjustable from 1 minute to 99 days |
| Function SetpointWAIT | the process time does not start until the set temperature is reached |
| Calibration | three freely selectable temperature values |
| adjustable parameters | temperature (Celsius or Fahrenheit), fan speed, air flap position, programme time, time zones, summertime/wintertime |
Ventilation
| Fan | forced air circulation by quiet air turbine, adjustable in 10 % steps |
|---|---|
| Fresh air admixture | adjustment of pre-heated fresh air admixture by air flap control in 10 % steps for each segment individually |
| Vent | vent connection with restrictor flap, electronically adjustable |
Communication
| Documentation | programme stored in case of power failure |
|---|---|
| Programming | AtmoCONTROL software on a USB stick for programming, managing and transferring programmes via Ethernet interface or USB port |
Safety
| AutoSAFETY | additionally integrated over- and undertemperature monitor "ASF", automatically following the setpoint value at a preset tolerance range, alarm in case of over- or undertemperature, heating is switched off in case of overtemperature |
|---|---|
| Autodiagnostic system | for fault analysis |
| Alarm | visual and acoustic |
Standard equipment
| Internals | 2 stainless steel grid(s), designed for Plastelin application |
|---|---|
| Works calibration certificate | incl. works calibration certificate for +37°C |
| Door | fully insulated stainless steel door with 2-point locking (compression door lock) |
Stainless steel interior
| Volume | 1060 l |
|---|---|
| Dimensions | w(A) x h(B) x d(C): 1040 x 1200 x 850 mm |
| Max. number of internals | 14 |
| Max. loading of chamber | 300 kg |
| Max. loading per internal | 60 kg |
Textured stainless steel casing
| Dimensions | w(D) x h(E) x d(F): 1224 x 1720 x 1035 mm (d +56mm door handle) |
|---|---|
| Installation | on lockable castors |
Electrical data
| Voltage Electrical load | 400 V and 3x 230 V w/o neutral, 50/60 Hz approx. 1725 W |
|---|
Ambient conditions
| Set Up | The distance between the wall and the rear of the appliance must be at least 15 cm. The clearance from the ceiling must not be less than 20 cm and the side clearance from walls or nearby appliances must not be less than 5 cm. |
|---|---|
| Altitude of installation | max. 2,000 m above sea level |
| Ambient temperature | +5 °C to +40 °C |
| Humidity rh | max. 80 %, non-condensing |
| Overvoltage category | II |
| Pollution degree | 2 |
Packing/shipping data
| Transport information | The appliances must be transported upright |
|---|---|
| Customs tariff number | 8419 8998 |
| Country of origin | Federal Republic of Germany |
| WEEE-Reg.-No. | DE 66812464 |
| Dimensions approx incl. carton | w x h x d: 1370 x 1970 x 1300 mm |
| Net weight | approx. 260 kg |
| Gross weight carton | approx. 424 kg |
Standard units are safety-approved and bear the test marks
